SD Innovations

egypt

Egypt.

SD innovationAplicas Composite

Elmam-Medical-Group

Glass Dappen Dish

Tofflemire Matrix Holder
1 pc .
Made in&nbsp;Pakistan

PAKISTAN TOFFLEMIRE MATRIX HOLDER

• small with ledge (№ 1.0971) 10 pcs.
• small (№ 1.0972) 20 pcs.
• large (№ 1.0973) 20 pcs.
• large with ledge (№ 1.0974) 10 pcs.
• medium with ledge (№ 1.0975) 10 pcs.
• medium (№ 1.0976) 30 pcs.
• ring (standard) (№ 1.099) 1 pcs.
• clamp Delta (№ 1.299) 1 pcs.
There are 4 types of matrices: • 0,050 mm hard, • 0,035 mm hard, • 0,050 mm soft, • 0,035 mm soft.
Specify, please, the necessary type, e.g., 1.398 - hard 0,035 mm, otherwise you' ll receive matrices of the first type, i.e. hard 0,050 mm.
WARNING!!! When operating with ring: 1) make sure of integrity of the ring and absence of rust on it; 2) avoid high-speed opening; 3) open the ring for width not more than 10 - 12 mm; 4) open the ring for necessary width outside the mouth before placing it on a tooth. 
CLEANING AND STERILIZATION INSTRUCTIONS:
 1) Submerge instruments in cleaning agent solution with neutral pH for 20 min; 2) Rinse the instruments thoroughly with purified water for 3-5 min;
3) Perform standard moist heat / steam sterilization procedure following the sterilizer instructions. WARNING!!! 1) Do not use cleaning agents with high percentage of chlorine and cleaners containing oxalic acid; 
2) Do not keep instruments in liquid medium for more than 3 hours

TOR-VM SET OF SECTIONAL CONTOURED MATRICES - (100 PCS)

DENTAL CAPSULE APPLIER APPLICATOR GUN for (GC Fuji) (SDI Riva)

TPC CAPSULES APPLICATOR GUN

18 pcs. :&nbsp;small № 1.311(1) – 6 pcs.,
medium № 1.312(1) – 6 pcs.,
large № 1.313(1) – 6 pcs.,
small springclip № 1.003 – 1 pc.
Matrices are available of two thicknesses – 0,050 mm and 0,035 mm.
Specify, please, the necessary type, e.g., 1.310 – 0,035 mm, otherwise you’ ll receive matrices of the first type, i.e. 0,050 mm.

TOR-VM SADDLE METAL MATRICES KIT (18PCS)

Amalgam&nbsp;Condenser
1 pc .
Made in&nbsp;Pakistan

Amalgam Condenser one piece. Made in Pakistan.

Pakistan Amalgam Condenser

The TwinRing is designed for use in sectional Class II matrix adaptation and can be used with any matrix. The unique design allows the TwinRing to adapt to a variety of tooth types and shapes. The geometry of the ring causes it to apply a strong, even tension that:
<ul><li>assists in the separation of the teeth</li><li>creates a strong seal with the matrix without collapsing the matrix into the cavity</li><li>and doesn’t allow the composite to flow past the gingival margin which eliminates line angle overhangs.</li></ul>
The structural design of the TwinRing causes it to have excellent form memory; it is guaranteed to retain its original shape without warping, even after hundreds of uses.
Each pack contains 2 Twin Rings.

The TwinRing is designed for use in sectional Class II matrix adaptation and can be used with any matrix. The unique design allows the TwinRing to adapt to a variety of tooth types and shapes. The geometry of the ring causes it to apply a strong, even t