Nile Dental

egypt

Egypt.

BeautiBond Universal is a light-curing, self-conditioning one-component adhesive of the latest generation, which is suitable for composite fillings and for the repair of restorations as well as for the permanent cementation of indirect restorations (including veneers), with light- or dual-curing composite cement, as well as for cup abutments with composite cements and composites suitable.&nbsp;Due to its ease of use, its low technical sensitivity and the reduction of the work steps to just one step, it offers a consistently high level of process reliability and efficiency - for a long-term stable adhesive bond.&nbsp;The practical adhesive is characterized in particular by a special formulation of phosphonic and carboxylic acid monomers, which does not require the addition of HEMA.&nbsp;This virtually eliminates white discolouration of the gingiva during application and postoperative sensitivities, while at the same time the susceptibility of the polymerized bonding layer to hydrolysis is significantly reduced - for permanently stable adhesion, more safety in routine practice and long-lasting restorations for the patient.&nbsp;BeautiBond Universal Adhesive + CR Enhancer = cementation of indirect restorations (including veneers) made of silicate glass, lithium silicate and composite with light- or dual-curing composite cement.

BeautiBond Universal CR Enhancer 3ml - SHOFU

BeautiBond Universal DC Activator 3ml Activator - SHOFU

For adhesive bonding of porcelains
The AZ-Primer has been exclusively developed for the modern materials zirconia and alumina and guarantees outstanding bonding values between the restoration and the hard tooth structure.
The 6-MHPA monomer, specially adapted for high-performance porcelains, anchors itself permanently to the restoration and thus is superior to other bonding systems, especially “all-in-one” products.

AZ-Primer - SHOFU

to_fixed

Discount

Zirconomer Improved defines a new class of restorative that promises the strength and durability of amalgam with the protective benefits of glass ionomer while completely eliminating the hazard of mercury. This high strength restorative has been specially reinforced with nano-zirconia fillers that not only impart remarkable mechanical properties to the restoration for posterior load bearing areas but also provides enough translucency to match natural tooth. Combination of outstanding strength, durability and sustained fluoride protection deems it ideal for permanent posterior restoration in patients with high caries incidence as well as cases where strong structural cores and bases are essential.
Features
<ul><li>High strength and durability like Silver amalgam with protective benefits of glasionomer</li><li>Improved edge strength and marginal adaptation</li><li>High translucency, flexural modulus and compressive strength</li><li>Improved mixing and handling characteristics</li><li>Excellent resistance to abrasion and erosion</li><li>Remarkable radiopacity</li><li>Sustained high fluoride release for anti-cariogenic benefits especially in cases with high caries risk</li><li>Exceptional for minimally invasive procedures as it chemically bonds to enamel and dentin while displaying tooth-like co-efficient of thermal expansion, which results in low interfacial stresses and minimizes potential for failure</li><li>Packable and condensable like amalgam without the hazard of mercury or the risk of corrosion, expansion and thermal conductivity</li></ul>
Packaging
Zirconomer 1-1 Set [PN 3130] contains:
<ul><li>12 gm Powder & 5 ml Liquid, Mixing Pad, Spoon & Spatula</li></ul>
Available Shade:
<ul><li>Universal Shade</li></ul>

ZIRCONOMER IMPROVED 1-1 - SHOFU

BeautiCem SA is a self-etch, self-adhesive, dual-cure resin cement incorporating SHOFU’s proprietary “Giomer” filler technology. High bond values across all substrates provide piece-of-mind for all of your cementation needs. A quick two-second flash-cure provides easy marginal clean-up. The low 12 µm film-thickness allows extra space in tight-fit situations and nearly undetectable margins. The addition of Giomer technology offers well-documented bioactive properties serving to remineralize and protect tooth structure.
<ul><li>Self-etching, self-adhesive resin cement</li><li>No primer required for all substrates (except porcelain)</li><li>Auto-mixing syringe eliminates hand mixing</li><li>Dual cure for easy cleanup</li><li>High Radiopacity</li><li>Low film thickness (12 μm)</li></ul><table><tbody><tr> <td>5 ml/9.2 gm automix syringe</td></tr></tbody></table>

BeautiCem SA Auto-mixing Clear - SHOFU

Beautifil-Bulk Flowable incorporates Shofu’s bioactive, Giomer filler technology, an S-PRG material demonstrating 13 years of clinical success*, within a fast and easy bulk fill composite. Designed to deliver aesthetic results, low shrinkage stress and complete polymerization at 4 mm depth of cure.
<ul><li>High filler ratio (73 wt%) helps to reduce volumetric shrinkage (3.5 %) and shrinkage stress while increasing compressive and flexural strength</li><li>Vickers Hardness test results (48 Hv) show above 95 % polymerization at 4mm depth of cure</li><li>High flexural strength (119 Mpa) with a low flexural modulus (9 Gpa)</li><li>Natural Opaque shade stability to match surrounding tooth structure</li><li>Superior fluoride release and rechargeability</li><li>Self-leveling allows easy adaptation</li><li>10 second cure time</li><li>High level of radiopacity, 2.5 Al:mm</li></ul>

BEAUTIFIL Bulk Flow Syringe - SHOFU

Filling composite in two viscosities for all cases of conservative treatment
Both pourable or injectable, the Beautifil-Bulk system allows practitioners to place the product in layers up to 4 mm thick.&nbsp;In addition to being endowed with low shrinkage stress, it exhibits optical diffusion properties allowing the restoration to blend in with its surroundings.
All Beautifil-Bulk products are multi-functional giomeric composites loaded with bioactive particles.&nbsp;They are characterized by permanent fluoride release and absorption, anti-plaque effect, acid neutralization and remineralization of tooth structure.&nbsp;The structure of the filler and the multifunctional glass core allow the natural diffusion of light, a perfect chameleon effect on the dentin / enamel assembly.&nbsp;This results in exceptionally aesthetic restorations, even with just one shade.
Advantages
<ul><li>Two viscosities - foulable and injectable</li><li>Low polymerization shrinkage and less shrinkage tension</li><li>Curing thickness per large layer (4 mm)</li><li>Ideal optical characteristics (chameleon effect)</li><li>High radiopacity</li></ul>
Indications
<ul><li>The low viscosity Beautifil-Bulk Flowable is injected directly and precisely with a syringe and is particularly suitable as a base for Class I and II cavities or as a liner and sealant for small posterior cavities.</li><li>Beautifil-Bulk Restorative is a groundable and easy to sculpt material.&nbsp;It supports an occlusal pressure of 340 MPa.&nbsp;Its pasty but non-sticky consistency makes it ideal for direct posterior restorations.</li></ul>

BEAUTIFIL Bulk Flow Capsules - SHOFU

Beautifil-Bulk Restorative provides exceptional condensability and sculptability ideal for posterior restorations. Delivering superb shade stability, low shrinkage stress and full polymerization at 4 mm, Beautifil-Bulk Restorative is an esthetic, advanced Giomer restorative you can rely on.
<ul><li>High fill ratio (87.0 wt% 74.5 vol%) reduces polymerization shrinkage and shrinkage stress while increasing compressive and flexural strength</li><li>Ideal balance of light diffusion and transmission ensures complete polymerization at 4 mm depth of cure</li><li>Outstanding Vickers hardness value</li><li>Optimum translucency creates esthetic shades unaffected by surrounding intraoral color</li><li>Sustained fluoride release and rechargability</li><li>High level of radiopacity</li></ul>

BEAUTIFIL Bulk Restorative Syringe - SHOFU

Injectable filling composite for anterior and posterior
Beautifil Flow Plus combines the ease of application of a flowable product with the stability, durability and aesthetics of a moldable hybrid composite.&nbsp;Suitable for all filling classes, including occlusal surfaces and proximal edges.&nbsp;Improved characteristics allow its application by injection.&nbsp;Posterior restorations have never been easier.&nbsp;In addition, Beautifil Flow Plus's ability to release and absorb fluoride and its resistance to bacterial colonization make it an ideal choice for preventing secondary caries.
Beautifil Flow Plus is available in two viscosities.&nbsp;Very stable “F00” and more fluid “F03”.
Both are suitable for the usual use of fluid products but also in the occlusal area which implies a possible use for class I and II fillings.
Featuring a 360º rotating syringe and a thin disposable needle, Flow Plus composite is easily extruded by direct application.
Advantages
<ul><li>Class I to V cavity restorations</li><li>High tensile and flexural strength</li><li>Possible application of the "Technical cone"</li><li>Natural aesthetics with chameleon effect</li><li>Permanent absorption and release of fluoride</li><li>Exceptional radiopacity</li></ul>
Indications
<ul><li>F00 - ZERO Flow: Modeling of the occlusal anatomy, marginal ridges and complex details;&nbsp;cavity restorations of all classes</li><li>F03 - Low Flow: Restoration of cracks, correction close to the gingival tissue;&nbsp;base liner</li></ul>

BEAUTIFIL Flow Plus F00 - SHOFU

Injectable anterior and posterior filling composite
Beautifil Flow Plus combines the application properties of a flow with the stability, durability and aesthetic of packable composites. It is approved for every classification – including occlusal surfaces and proximal margins. With improved handling properties allowing an injectable application, creating posterior restorations has never been easier. Moreover, the ability of Beautifil Flow Plus to release and recharge fluoride and it’s resistance to bacterial colonisation makes it ideal for the prevention of secondary caries.
Beautifil Flow Plus is available in two viscosities, ”F00“ is extremely stable and ”F03“ is moderately flowable.
Both are suited to the known flow indications, but as well to the occlusion-bearing areas which means they can also be used for class I and II fillings.
With the 360º rotary finger grip and a replaceable fine cannula the Flow Plus composites are easily applied directly out of the syringes.
A wide range of colours and various opacities are available for aesthetic restorations in single and multi shade technique.
Benefits
<ul><li>Restorations of Class I – V cavities</li><li>High tensile and flexural strength</li><li>”Cone technique“ application</li><li>Natural aesthetics with chameleon effect</li><li>Sustainable fluoride release and recharge</li><li>Exceptional radiopacity</li></ul>
Indications
<ul><li>F00 – Zero Flow: Shaping of occlusal anatomy, marginal ridges and intricate surface details, restorations of all cavity classes</li><li>F03 – Low Flow: Restoration of pits, gingival boxes for surface modification; serves as a baseline</li></ul>

BEAUTIFIL Flow Plus F03 - SHOFU

Injectable hybrid composite in two viscosities
This durable composite restorative for both anterior and posterior teeth allows you to place direct restorations with an excellent self-levelling ability and outstanding physical properties, absolutely equivalent to those of conventional hybrid composites. Thanks to its nano S-PRG filler, Beautifil Flow Plus X not only helps to remineralise the adjacent tooth structure for sustainable caries prevention, but also easily polishes to a high and long-lasting lustre. It comes in two different viscosities, F00 and F03, for restorative build-up and filling.
Indications
<ul><li>F00 – Zero Flow
Excellent shape retention, ideal for build-up: The flowability of F00 is so low that the paste is not deformed during layering. This easy-to-handle composite helps you to accurately restore the occlusal morphology, including cusps and marginal ridges. Main benefit: It flows well during application, but does not slump after sculpting.</li><li>F03 – Low Flow
Moderate shape retention and viscosity plus perfect adaptation: The self-levelling F03 paste thoroughly wets the cavity walls and is therefore ideal for filling. It can be used to line cavity floors, fill small occlusal cavities, or create cervical restorations.</li></ul>
Benefits
<ul><li>Complete system for all conservative/ restorative indications</li><li>Simplified handling in direct applications</li><li>Compatibility with all conventional bonding systems</li><li>Wide range of shades for aesthetic restorations</li><li>Optimal polishability and durable gloss</li></ul>